Please share our page on:

or follow us on:

Selector Guide
Power Fall - Powered Trickle Filter
Black Box Filters
KF 2500 Fibreglass Filter
KF 4000 Fibreglass Filter
KF 5000V Fibreglass Filter
KF 8000 G & P Fibreglass Filter
KF 10,000V Fibreglass Filter
KF 12,000 G & P Fibreglass Filter
KF 18,000V Fibreglass Filter
KF 20,000 G & P Fibreglass Filter
KF 45,000V Fibreglass Filter
Big Bertha Modular Filters
Rotafold Bio Filter
Fibreglass Vortex Units
Vortex Units (MDPE)
Bio-Fall Fibreglass Filters
3D Sand Filter
Cartridge Filter
Thermoplastic Sand Filter

KF 10,000V Fibreglass Filters

Lids no longer available.

The KF10000V is a high quality, free-standing, fibreglass, four bay, filter with integral vortex designed to improve your fish's environment. Its "state-of-the art" multi chamber ensures maximum filtration with the minimum of maintenance. The unit is suitable for fish ponds of up to 10,000 litres and a maximum flow rate of 6,000 litres ph. However, with lighter stocking densities or in fish free ponds the KF10000 will comfortably cope with larger volumes. The integral Vortex enhances the unit's performance and reduces the maintenance intervals

The media package consists of:

Bay 1: Six 16" long x 8" diametre polypropylene filter brushes - They are of a semi-rigid construction with a wire loop at the end for easy installation.

Bay 2: Blue matting - This is an excellent filter media as it has excellent bio-mass retention and its open texture removes larger particles from the water.

Bay 3: Six layers of sponge with varying layers of porosity, two large foam blocks and a layer of flocor.

Bay 4: Filled with Flocor. The large surface area of Flocor tubes makes it an ideal filter media.

Click on the relevant sized filter above to go directly to that filter model.

Lids no longer available.

81” long x 21” wide x 24” Deep

Maximum flow rate 6,000 litre per hour

Three drainage points - (Accepts 1.5" solvent weld pipe for remote drainage)

Supplied with 3 1.5" Kockney Koi Ball Valves

The pump fed model has a 4" inlet and outlet while the gravity fed model has a 4" inlet and 1.5" outlet.

Share our site via:

www.kockneykoi.co.uk / www.yamitsu.com